Detail ACF-4M
AUDIOMAGNETOTELLURIC DATA ACQUISITION SYSTEM :
PURPOSE:
The ACF-4M equipment is intended for carrying out audiomagnetotelluric and frequency soundings using natural and controlled sources electromagnetic fields.
AREAS OF APPLICATION:
regional geophysical investigations, searching of oil and gas structures and deep ore deposits, mapping of fracture zones and detection of kimberlite pipes, control of state of nuclear and chemical waste depositories, hydrogeological and geothermal investigations, monitoring of geodynamic processes and earthquake prediction.
FEATURES OF THE RECEIVER :
? control of measurement can be realized using both keypad of the recorder and external PC;
? the equipment allows carrying out either four-component ( tensor) or two-component ( scalar) measurements;
? measurement results are stored into the internal memory during field works;
? the equipment has the possibility of fulfillment of program-controlled monitoring;
? both time series and spectrograms can be collected, apparent resistivity and impedance phase are calculated directly in the recorder;
? program control of the equipment is provided, the recorder have the possibility of visualization of spectral parameters at the display and estimation of data quality takes place directly at a point of measurements;
? the measurements can be carried out using either grounded or ungrounded electric antennae that allows fulfilling measurements in all seasons and in case of bad grounding conditions ( frequency band of the ACF-4M equipment with ungrounded line is 7 ? 800 Hz) ;
? the GPS receiver can be connected to the recorder during field works ( coordinate detection and time synchronization) ;
? depth of investigation is from 30-50 m to 2-3 km.
Jakarta - Indonesia
Telp. 021 8611 444 ( hunting)
Call : 0815 614 1954, 0813 992 919 09, 0811 893 101
Ungrounded electrical lines can be obtained for investigations by AMT method under adverse conditions of ground ( dry sand, frozen earth, snow and ice) in frequency range from 7 Hz and higher.
At measurements with ungrounded electrical lines are used:
- preamplifier with high input resistance;
- long receiving lines ( 100 m) ;
- robust data processing.
TECHNICAL CHARACTERISTICS:
Number of channels 4
ADC, bit
24
Frequency range, Hz
0.1-800
Internal memory, Mb
1024
Connection to PC
Ethernet
Display
LCD, monochrome
Display resolution, pix. 320E240
Keypad
18 keys
Built-in accumulator
5 * hours
Operation with built-in accumulator, hours 8
External power, V
12
Dimensions and weight 340x295x155 mm 5.0 kg
Tampilkan Lebih Banyak